Cost
Whole-Home Repiping Cost: Why Doing It Once Costs Less Than Doing It Twice
Whole-home repiping costs more up front than fixing one leak at a time — but piecemeal repairs on a Poly B system almost always cost more in total. Here's the real math.
Most insurers want to see full replacement, not a series of patches — meaning the 'cheaper' spot-repair path can still leave your coverage unresolved.
Get your Poly B repair quote
Get a firm, fixed price for the whole home — pipe and drywall restoration together.
We’ll email you to connect you with a licensed plumbing contractor, who confirms your Poly B on site and gives you a firm price — pipe and walls, one number.
Firm, written price before any work begins — no surprise billing, ever.
The Upfront Number
What Whole-Home Repiping Costs Upfront
Whole-home repiping typically runs $8,000 to $18,000, with most single-family homes landing between $10,000 and $13,000, plus roughly $800 to $1,500 per bathroom beyond the base scope. It's a real number, and it's higher than the cost of fixing a single leak.
But that upfront comparison is misleading on its own — a single spot repair only ever addresses the part of the system that's already failed, not the risk sitting in the rest of the pipe run.
The Piecemeal Alternative
What Repeated Spot Repairs Actually Cost
Each individual Poly B repair — opening a wall, fixing the section, closing it back up — carries its own labour and drywall cost, and because the whole system aged together, a second and third failure elsewhere in the house isn't unusual within a few years.
Add up two or three spot repairs over a handful of years, each with its own service call and drywall patch, and the total can approach or exceed what a single whole-home repipe would have cost — without ever actually resolving the underlying risk.
The Real Comparison
Doing It Once vs Doing It in Pieces
A whole-home repipe is one project, one quote, one disruption to your home — after which the Poly B risk is fully resolved. Piecemeal repairs are a series of smaller, cheaper-looking events that never actually close the underlying issue, and each one still requires opening and restoring drywall.
There's also the insurance angle: most insurers look for full replacement, not a repair history, when deciding whether to restore standard coverage — see our Poly B replacement cost breakdown for how the drywall restoration factors into a whole-home quote specifically.
The Trade-Off
Whole-Home vs Piecemeal, Side by Side
Same underlying system, two very different paths.
One project, one fixed price, the whole Poly B risk resolved in one to two days for most homes.
Lower cost per visit, but repeated service calls and drywall patches, with the underlying risk never fully closed.
Insurers generally respond to full replacement, not a repair history — see home insurance and Poly B.
Getting a Real Number
See What Whole-Home Repiping Costs for Your House
The only way to know the real number is a referral to a licensed contractor — they give you a fixed quote for the whole home, pipe and drywall restoration together, so you can compare it honestly against whatever the piecemeal path would actually cost you.
Financing the Upfront Cost
If the Upfront Number Is the Barrier
If the upfront cost of a whole-home repipe is what's holding you back from doing it once instead of piecemeal, see our financing page for an honest look at how homeowners generally approach paying for it — we don't have a confirmed program of our own yet, but we're straightforward about what's true today.
Either way, understanding the real total-cost comparison between whole-home and piecemeal repairs is worth doing before deciding purely based on which number looks smaller today.
It's also worth remembering that the piecemeal comparison isn't just about dollars — every additional spot repair means another day of disruption, another access point opened and closed, and another round of living with uncertainty about when the next one might happen, costs that don't show up on an invoice but are real all the same.
Common Questions
Frequently Asked Questions
Is whole-home repiping cheaper than fixing leaks one at a time?
Not upfront, but repeated spot repairs on an aging Poly B system often add up to a similar or higher total cost over a few years, without ever resolving the underlying risk. We're happy to walk through both the whole-home number and a realistic estimate of what piecemeal repairs would likely cost over a few years, so you can compare the real trade-off rather than just the smaller upfront figure.
How much does whole-home repiping typically cost?
Most single-family homes run $10,000 to $13,000, with a wider range of $8,000 to $18,000 depending on size and access.
Does the whole-home price include the drywall?
Yes — our in-house team restores every opening as part of the same fixed quote.
Will my insurer accept a series of spot repairs instead of full replacement?
Generally no — most insurers look for full replacement, not a patch history, when deciding whether to restore standard coverage.
How do I get an exact price for my home?
A referral to a licensed contractor gets you a firm, fixed quote based on your home's actual size, bathrooms and access. We'll walk you through both numbers honestly during your assessment, including what a realistic piecemeal alternative would likely cost over time for comparison.
What is the average cost to repipe a house in Canada?
House repipe cost Canada figures move with fixture count and access rather than with a national average, so the average cost to repipe a house is a weak guide for any specific home. Cost per bathroom repipe is the more useful frame - bathrooms concentrate fixtures, and fixtures drive the run.
How does the cost differ by home type?
Cost to repipe a bungalow is often lowest, because attic access reaches most of the run. Cost to repipe a two storey house rises with the upper floor's fixtures and the ceiling work beneath them. Cost to repipe a townhouse and cost to repipe a condo depend heavily on shared walls and what the building's rules allow, which is worth checking before any quote.
In Short
Whole-Home Repiping Cost — The Short Version
Whole home repiping cost typically runs $8,000 to $18,000, most often $10,000 to $13,000 — more upfront than a single spot repair, but usually less in total than repeated piecemeal fixes on an aging Poly B system, and it's what actually resolves the underlying risk insurers care about. A referral to a licensed contractor gets you the real number for your home. The comparison isn't just financial either — every additional spot repair means another disruption, another access point, and more uncertainty about when the next one happens, costs that don't show up on an invoice but are worth weighing alongside the dollar figures.
Get Started
Get Your Whole-Home Repiping Price
One fixed price, pipe and drywall together — see what it costs to do it once.
Get My Poly B Repair Quote